Federal Micro Dimensionair

$939.00 -- Mahr-Federal

Technical Data:
Operating Temperature	5 - 35° C / 41 - 95° F
Storage Temperature	0 - 60° C / 32 - 140° F
Repeatability	± 1 digit
Linear Error	± 1% FS + 1digit
Response Time	Approximately 1 sec.
Thermal Stability	0.1% of full scale/°F
Data Output	ASCII/Digitmatic (cable selectable)
Tolerance Indicators	Two - over/under
Weight	2kg / 5 lbs. Main body - approximately 100 x
Dimensions	60 x 70 mm 4 x 2.5 x 3 in
Auto Power Off	30 minutes of non use
Power Requirement	3 volt lithium battery coin cell two per unit - Type CR-2450
Battery Life	3000 hours
Air Supply	2 bar ± 5% / 32psi ± 5%
Display	Rotates through 270°

μDimensionair. No other air gaging system offers so much - in the palm of your hand - mounted to the workbench or even right to the machine tool. IP-54 rating means it’s meant to be used on the shop floor - and the air tooling cleans the part from dirt for high performance measurements - fast and easy! No more looking over your shoulder to see the air gage readout - it's right in front of you - simple and clear. The fixed resolution and balanced air system makes the gage a stable and reliable system for your manufacturing environment - single mastering means fast set up.

Features:
The ultimate in configuration - interchangeable handle allows for pistol grip or normal end mount for easy application of the plug to the part. For large, heavy plugs, mount the handle between the tooling and the display - for a well-balanced - ergonomic measuring system. Or mount to the bench stand and bring parts to the gage.

Inch/metric
Digital and Analog display
Bi- and Uni-lateral Tolerances with preset
Absolute transducer - no travel errors
"Calibratable: - battery retains settings
Multiple data output formats
Auto-zeroing
Normal-Reverse settings for ID/OD measurements

All standard measuring elements (jet air plug gages, jet air ring gages or jet air snap gages) can easily be attached to the μDimensionair via the supplied adapter.

Purchase Federal Micro Dimensionair

SKU: 2095389

Other products in the category Amplifiers:

Federal Dimensionair Air Gages (single master system) -- Mahr-Federal

QC-330 Series -- Metronics

Quadra Chek 100 Series -- Metronics

Quadra Chek 200 Series -- Metronics

Gage-Chek -- Mahr-Federal

Quadra Chek 300 Series -- Metronics

Accusetter II Column Amplifier -- Edmunds

Federal 832 Dimensionair Digital Electronic Amplifier -- Mahr-Federal

Millitron 832 -- Mahr-Federal

Trendsetter II Column Amplifier -- Edmunds

776 Gage-Chek -- Starrett

MicroComp Amplifier -- Albion Devices, Inc.

RELATED PRODUCTS

Output Cable

Pressure Regulator

Universal Bench Mount